Application Guide

P a g e | 50
DP750/DP720 Administration Guide
Version 1.0.3.37
DECT Page Definitions
Table 11: DECT Page Definitions
General Settings
Base Station Name
Displays the name of the base station. Default is DP750[last 6 digits of MAC
address].
Admin PIN Code
Configures admin PIN code for authentication. Default is 0000.
Enable Repeater
Mode
Enables the base station repeater mode to associate with available repeaters. Once
enabled the base station starts searching for nearby repeaters and open
subscription to associate with the available repeaters. This option requires
rebooting the base station to take effect. Default is No.
Note: Grandstream’s repeater is not officially released.
Enable Repeater
Management
Enables base station network management of discovered and paired repeaters.
Once enabled, users need first to reboot the base station to take effect, then login
on the web UI and browser to Status page, a new tab “DECT Repeater Status” will
be available to display discovered and paired devices and also allowing users to
associate / dissociate repeaters and also access their web GUI. Default is No.
Clear Call Logs
Deletes call history logs of all handsets from base station.
Handset Settings
Handset
Displays list of handsets’ indexes, from HS 1 to HS 5.
Handset Name
Allows to customize handset name. Default is “HS1” to “HS5”
Handset
Phonebook
Assigns private phonebook to handset. Each handset has a
private phonebook or can be disabled. A private phonebook can
be shared between specific handsets.
Example: PB1 assigned to HS1 and HS2
Off-hook Auto-
dial
Configures a number to auto dial when off-hook.
SIP Account Settings
Account
Displays list of accounts’ indexes, from account 1 to account 10.
SIP User ID
Enters SIP user ID provided by VoIP service provider (ITSP). Usually in the form of
digit similar to phone number or actually a phone number.
Authenticate ID
Enters account authenticate ID provided by VoIP service provider (ITSP). Can be
identical to or different from “SIP user ID”.