Application Guide

P a g e | 60
DP750/DP720 Administration Guide
Version 1.0.3.37
Device Custom
Private Key
Configures the private key used by device during provisioning and web access
Enable Device
Custom Certificate
When enables the device will use the custom certificate, otherwise it will use the
default certificates. Default is No.
Date and Time
NTP Server
Defines URL or IP address of the NTP (Network Time Protocol) server.
Used by the base to synchronize the date and time. A list of public NTP servers
can be found at pool.ntp.org.
NTP Update Interval
Contacts NTP server at specified period of time (in minutes) to obtain the date and
time. Default is 60 minutes.
Allow DHCP Option
42 to NTP Server
Obtains NTP server address from a DHCP server using DHCP Option 42; it will
override configured NTP Server. If set to No”, the base will use configured NTP
server to synchronize time and date even if a NTP server is provided by DHCP
server. Default is No.
Time Zone
Selects time zone to define date/time on the base.
Self-Defined Time
Zone
Allows users to define their own time zone.
Allow DHCP Option
2 to override time
zone
Obtains time zone setting (offset) from a DHCP server using DHCP Option 2; it
will override selected time zone. If set to No”, the base station will use selected
time zone even if provided by DHCP server. Default is No.
Syslog
Syslog Server
Sets IP address or URL of system log server. The server collects system log
information from the base station.
Syslog Port
Configures the Syslog port. When configured, the Syslog messages will be sent
to this port instead of the default syslog port. Default is 514.
Syslog Level
Selects log level; the level is one of DEBUG, INFO, WARNING, ERROR (default
is NONE). Syslog messages are sent based on the following events:
1. product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. inbound and outbound calls (INFO level)
6. registration status change (INFO level)