Application Guide

P a g e | 91
DP750/DP720 Administration Guide
Version 1.0.3.37
Figure 39: Repeater Associated Status
❖ Associating DP760 using Repeater Management Mode on DP750
The repeater management mode displays discovered and paired devices using their name, IP and Mac
addresses and also gives the possibility of associating the DP750 Base Station with DP760 DECT Repeater.
Please refer to following steps in order to associate DP760 with DP750 using repeater management mode:
1. Access the Web GUI of your DP750 using the admin’s username and password. (Default username
and password are admin/admin).
2. Navigate to Status  DECT Repeater Status and select the repeater station from Discovered Devices.
3. Clink Link button to associate the base and repeater stations.
Note: The DP760 Repeater stations associated with DP750 Base Station are displayed and available under
Status  DECT Repeater Status  Paired Devices with their status, signal strength, number of active
calls and possibility to disconnect them from the paired base station.