User Manual

P a g e | 47
GAC2500 User Guide
Version 1.0.3.27
• Start/Stop recording: Tap to start/stop recording.
• Volume: Tap to bring up the volume bar to adjust the volume.
• More: Bring up more options including like MPK, Transfer, etc.
• DTMP Keypad: Tap to bring up the DTMF keypad.
• End: End the current line.
Call Hold and Call Resume
- Call Hold
During the active call, press HOLD button to put the current call on hold. Users could then make or
answer a new call. It shows as follows:
Figure 31: GAC2500 Call On Hold Screen
- Resume to Call
If the active call is on hold, users could press the "UnHold" button to resume call or tap on the "End" button
to hang up the call.
Call Record
Users could save the call conversations to the GAC2500 by recording during an active call. You can listen
to the recordings from Recorder, please refer to the chapter Recorder for details.
1. During an active call, tap on the “Start Recording” soft key in the bottom to start recording as shown in
the figure below:
2. Tap on the Stop Recoding soft key to stop recording.