Quick Installation Guide

~ 3 ~ ~ 4 ~
GHP610/W & GHP611/W DESCRIPTION
WALL MOUNT
Wall
mount
slots
Wall
mount
slots
100mm
PHONE CONFIGURATION
1. Connect the handset (RJ-11 port) and the base with the
phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket
of a hub/switch or a router (LAN side of the router)
using the Ethernet cable. This step can be skipped, if
using GHP610W & GHP611W with Wi-Fi.
• Mark two dots horizontally with
100 mm in between where to
wall mount the GHP610/W &
GHP611/W.
• Using a drill, make a hole on
each marked dot. Put a plastic
expansion bolt and screw (not
provided) on each hole. Leave
enough space on the screws
to mount the GHP610/W &
GHP611/W.
• Mount the GHP610/W &
GHP611/W on the screws using
its “Wall Mount Slots”.
Note: For easy deployment, the GHP610W/GHP611W is
out of the box precongured to connect to a default SSID
named wp_master with a password (WPA/WPA2 PSK)
equal to wp!987@dmin, users can adapt these settings
from the web UI as well to make it easier for deployment
on customer site.
1. Ensure your phone is powered up and connected to the
Internet.
2. Locate the MAC address on the MAC tag of the unit,
which is on the underside of the device, or on the
package.
3. From a computer connected to same network as the
GHP61X, type in following address using GHP61X’s
MAC address on your browser: https://<mac>.local
Example: https://3󰀨765dcc282.local
Note: The user can also dial **47# and the IP address
will be read by the IVR.
4. Enter admin’s username and password to access the
conguration menu. (The factory default username
is “admin” while the default random password can be
found on the sticker at the back of the unit).
Refer to online documents and FAQ for more detailed
information: https://www.grandstream.com/our-products
Earphone
Services Label
Flash
Volume Down Key
Softkeys
Redial
Microphone
Alphanumeric
Keypad
LED Indicator
Volume Up Key
Hold
Speaker
Magnetic Hook
RJ-11 Port
Mute
Voicemail
CONNECTING THE PHONE
To setup the phone, follow the steps below:
3. Powering the phone:
• For GHP610W & GHP611W: Connect the 12V DC
output plug to the power jack on the phone; plug the
power adapter into an electrical outlet.
• For GHP610 & GHP611: A PoE switch must be used
in step 2.