User Guide
Table Of Contents
- DOCUMENT PURPOSE
- CHANGE LOG
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- GETTING TO KNOW GRP26XX
- TELEPHONY FEATURES
- ADVANCED FEATURES
- CONTACTS
- CALL HISTORY
- CONNECTING TO DEVICES
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING GRP2612/GRP2612P/GRP2612W/GRP2613/GRP2614
P a g e | 50
GRP26XX User Guide
Version 1.0.0.31
Figure 23: Dynamic Attended Transfer
Note:
• For Auto-Attended Transfer, after dialing out the number for the second call, a "Split" soft key will show.
If the second call is not established yet (ringing), pressing "Split" will hang up the second call. If the
second call is established (answered), pressing "Split" will resume the second call and keep the first
call on hold.
Figure 24: “Split” softkey
• Clicking the Red highlighted “Transfer” Key would force a Blind Transfer.
Target Selection
Using the target selection feature, users can use the following function:
1) Add a new softkey "Target" under transfer/conference LCD action screen.
2) When click on the softkey, it will take user to a target selection page in which user can choose other
possible transfer/conference targets (e.g. Local/BS Phonebook, Local/BS Call Logs, LDAP…)
3) When accessing Local/BS Phonebook and Local/BS Call History page, the softkey will show limited
options (e.g. Dial) if the phone is under busy state to make it easier for users to perform the dialing
task.
4) When accessing Smart VPK List, the phone will display the list of the VPK targets which are allowed