User Guide

GRP26XX Administration Guide
P a g e | 31
SIP User ID
User account information provided by your VoIP service provider (ITSP). It’s
usually in the form of digits like phone number or actually a phone number.
Authenticate ID
SIP service subscriber’s Authenticate ID used for authentication.
It can be identical to or different from the SIP User ID.
Authenticate
Password
The account password required for the phone to authenticate with the ITSP
(SIP) server before the account can be registered.
After it is saved, this will appear as hidden for security purpose.
Name
The SIP server subscriber’s name (optional) that will be used for Caller ID
display.
Voice Mail User ID
This parameter allows you to access voice messages by pressing the
MESSAGE button on the phone. This ID is usually the VM portal access
number. For example, in UCM6xxx IPPBX, *97 could be used.
Picture
Specifies account’s picture that will be sent to the caller/callee when making
calls.
Account Display
This option allows you to configure how your SIP account label will be
displayed on the phone’s screen.
If set to “User Name”, LCD account label will display the Account Name
configured for this SIP account. If set to “User ID”, it will then display the SIP
User ID configured for this SIP account.
Account x → Dial Plan
Name
Enter the name for the configured rules.
Rule
Enter the rule settings (number pattern, prefix to add …etc).
Type
Choose the type of the rule (pattern, block, dial now, prefix & second tone).
Account x → Network Settings
DNS Mode
This parameter controls how the Search Appliance looks up IP addresses
for hostnames.
There are four modes: A Record, SRV, NATPTR/SRV, Use Configured IP.
The default setting is “A Record”.
If the user wishes to locate the server by DNS SRV, the user may select
“SRV” or “NATPTR/SRV”.
If “Use Configured IP” is selected, please fill in the three fields below:
• Primary IP:
• Backup IP 1;
• Backup IP 2.
If SIP server is configured as domain name, phone will not send DNS query,
but use “Primary IP” or “Backup IP x” to send SIP message if at least one of
them are not empty.