User Guide

GRP26XX Administration Guide
P a g e | 37
BLF Call-pickup
Configures BLF Call-pickup method:
• If select Auto:
The phone will do either Prefix or barge in code for BLF pickup
depend on which on is set.
• If select Force BLF Call-pickup by prefix:
The phone will only use Prefix as BLF pickup method.
• If select Disabled:
The phone will ignore both BLF pickup method, now the monitored
VPK will only dial the extension if pressed
BLF Call-pickup Prefix
Configures the prefix prepended to the BLF extension when the phone picks
up a call with BLF key. The default setting is **.
Call Pickup Barge-In
Code
Set feature access code of Call Pickup with Barge-In feature.
PUBLISH for Presence
Enables presence feature on the phone. The default setting is “No”.
Omit charset=UTF-8 in
MESSAGE
Omit charset=UTF-8 in MESSAGE content-type
Allow Unsolicited
REFER
Allow Unsolicited REFER to accomplish an outgoing call.
Special Feature
Different soft switch vendors have special requirements. Therefore, users
may need select special features to meet these requirements. Users can
choose from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro,
Huawei IMS, PhonePower and UCM Call center depending on the server
type. The default setting is “Standard”.
Broadsoft Call Center
When set to “Yes”, a Softkey “BSCCenter” is displayed on LCD. User can
access different Broadsoft Call Center agent features via this Softkey.
Please note that “Feature Key Synchronization” will be enabled regardless
of this setting. Default setting is “No”.
Note: To activate this feature, users need to change the special feature to
Broadsoft and setup the Broadsoft Call Center to take effect.
Hoteling Event
Broadsoft Hoteling event feature. Default setting is “No”. With “Hoteling
Event” enabled, user can access the Hoteling feature option by pressing the
“BSCCenter” softkey.
Call Center Status
When set to “Yes”, the phone will send SUBSCRIBE to the server to obtain
call center status. The default setting is “No”.
Broadsoft Executive
Assistant
When enabled, Feature Key Synchronization will be enabled regardless of
web settings.
Feature Key
Synchronization
This feature is used for Broadsoft call feature synchronization. When it’s
enabled, DND, Call Forward features and Call Center Agent status can be
synchronized between Broadsoft server and phone. Default is “Disabled”.