User Guide

ManualsBrandsGRANDSTREAM ManualsElectronicsIP Phone

Table Of Contents

GRP26XX Administration Guide

P a g e | 73

Network Page Definitions

Table 10: Network Page Definitions

Network → Basic Settings

Internet Protocol

Selects Prefer Ipv4 or Prefer Ipv6. The default setting is “Prefer Ipv4”.

IPv4 Address

Allows users to configure the appropriate network settings on the phone to

obtain Ipv4 address. Users could select “DHCP”, “Static IP” or “PPPoE”. By

default, it is set to “DHCP”.

Host name (Option 12)

Specifies the name of the client. This field is optional but may be required by

some Internet Service Providers.

DHCP Vendor Class ID

(Option 60)

Used by clients and servers to exchange vendor class ID.

The default setting is “Grandstream GRP2612” for GRP2612, “Grandstream

GRP2612P” for GRP2612P, “Grandstream GRP2612W” for GRP2612W,

“Grandstream GRP2613” for GRP2613 and “Grandstream GRP2614” for

GRP2614.

PPPoE Account ID

Enter the PPPoE account ID.

PPPoE Password

Enter the PPPoE Password.

PPPoE Service Name

Enter the PPPoE Service Name.

Ipv4 Address

Enter the IP address when static IP is used.

Subnet Mask

Enter the Subnet Mask when static IP is used for IPv4.

Gateway

Enter the Default Gateway when static IP is used for IPv4.

DNS Server 1

Enter the DNS Server 1 when static IP is used for IPv4.

DNS Server 2

Enter the DNS Server 2 when static IP is used for IPv4.

Preferred DNS Server

Enters the Preferred DNS Server for Ipv4.

IPv6 Address

MosIq

by 10. The threshold value of MOS-LQ causes the phone to send a critical

alert quality report to the central report collector.

Warning Threshold for

Delay

Configure the threshold value of one way delay (in milliseconds) that causes

the phone to send a warning alert quality report to the central report collector.

Critical Threshold for

Delay

Configure the threshold value of one way delay (in milliseconds) that causes

the phone to send a warning alert quality report to the central report collector.