User Guide

P a g e | 104
GWN7000 User Manual
Version 1.0.4.23
The following table describe the notifications configuration settings.
Table 42: Email Events
Filed
Description
Enabled
Enable/disable the notification. By default, it’s disabled
Memory Usage
Configures whether to send notification if memory usage is greater than the
configured threshold. By default, it’s disabled.
Memory Usage
Threshold (%)
Specifies the Memory Usage Threshold (%). Must be integer between 1 and 100.
CPU Usage
Configures whether to send notification if CPU usage is greater than the configured
threshold. By default, it’s disabled.
CPU Usage
Threshold (%)
Specifies the CPU Usage Threshold (%). Must be integer between 1 and 100.
Firmware upgrade
Configures whether to send notification on firmware upgrade. Default is disabled.
Add/Remove
Network Group
Configures whether to send notification when network groups has been
added/removed.
Additional SSID
Configures whether to send notification if any additional SSID is enabled. Default
is disabled.
Time Zone Change
Configures whether to send notification on time zone change. Default is disabled.
Administrator
Password Change
Configures whether to send notification on admin password change. Default is
disabled.
AP Offline
Configures whether to send notification when AP going offline. Default is disabled.
LED Schedule
GWN7000 supports the LED schedule feature. This feature is used to set the timing of the LEDs to stay
ON and when they will go OFF at customer’s convenience. This can be useful for example when the LEDs
become disturbing during some periods of the day. This way with the LED schedule, you can set the timing
so that the LEDs turn off at night after specific hours and maintain the Wi-Fi service for other clients without
shutting down the AP.
To configure LED schedule, on the GWN7000 WebGUI navigate to “System SettingsLEDs”.
Following options are available:
Table 43: LED Schedule settings
Option
Description
LEDs Always off
Turn off completely the LEDs.