User Guide

P a g e | 108
GWN7000 User Manual
Version 1.0.4.23
Read-Write
Community for IPv6
Gives the permission for the set community to access and read/write to devices in
management information base via IPv6 Protocol.
Trap Type
Choose the Trap Type from drop-down menu, 4 options are available: None,
SNMPv1, SNMPv2c and SNMPv2cInforms.
Monitoring Host
Enter the Monitoring Host’s IP/Domain Name (Network Management System
“NMS”)
Monitoring Host Port
Enter the Monitoring Host’s Port (Network Management System “NMS”)
Trap Community
Enter the Trap Community string to authenticate the client against the server.
Table 46: SNMP Advanced Page
SNMP Service
Listening on
Click on to add an SNMP Service Listening on:
• Set the Transport Type: UDPv4, UDPv6, TCPv4 or TCPv6.
• Choose the IP Address from drop-down menu list.
• Set the Port number on which the GWN7000 will listen on.
SNMPv3 Users
Click on to add an SNMPv3 User:
• Set the Username for authentication.
• Choose the Authentication type, 2 options are available: SHA and MD5.
• Set the Authentication Password from Authentication Passphrase.
• Enter the Password again to confirm from Authentication Passphrase
Confirmation.
• Choose the Privacy Protocol, 3 options are available: None, DES and
AES.
• Set the Privacy Passphrase.
• Enter the Privacy Passphrase in Privacy Passphrase Confirmation
field.
User Manager
Under this section, administrator can generate or create user accounts that will be used for VPN connection
authentication, click on in order to create a new user account.
The following table summarizes the configuration parameters: