User Guide

P a g e | 11
GWN7000 User Manual
Version 1.0.4.23
CHANGE LOG
This section documents significant changes from previous versions of the GWN7000 user manuals. Only
major new features or major document updates are listed here. Minor updates for corrections or editing are
not documented here.
Firmware Version 1.0.4.23
• Added support for enable/disable MPPE in both PPTP server and client. [MPPE]
Firmware Version 1.0.4.20
• Added support for Additional Routed Subnets. [Additional IPv4 Addresses][Additional IPv4 Static
Address][Destination IP]
• Added support for Timed Client Disconnect and Enhanced Client Blocking. [Clients Access]
• Added support for Client Bridge (GWN76xx Access Point is required for this feature.). [Client Bridge]
• Added support for OpenApp ID for Deep Packet Inspection. [DPI]
• Added support for Syslog Server. [Logserver]
• Added support for PPTP Server. [PPTP CONFIGURATION]
• Added support for Smart Queue QoS. [Smart Queue]
• Added support for Configurable web UI access port.[Web WAN Access][Web HTTP Access][Web
HTTPS Port]
• Added support for E-mail notifications. [Email/Notification]
Firmware Version 1.0.2.75
• Added support for Captive Portal [CAPTIVE PORTAL]
• Added support for Bandwidth Rules [BANDWIDTH RULES]
• Added support for Select Band per SSID [SSID Band]
• Added support for selectively enable 802.11b/g/n [Mode]
• Added option to enable/disable support for 802.11b devices [Allow Legacy Device(802.11b)]
• Added support for custom wireless power [Custom Wireless Power(dBm)]
• Added support for AP location using blinking LED [Access Point location]
• Added support for limit client count per SSID [Wireless Client Limit]
• Added support for better roaming decision [Enable Voice Enterprise]
• Added support for LEDs schedule [LED Schedule]
• Added support for Wi-Fi schedule [Wi-Fi Schedule]
• Added option to enable/disable DHCP option 66 & 43 override [Allow DHCP options 66 and 43
override]