User Guide

P a g e | 29
GWN7000 User Manual
Version 1.0.4.23
Table 11: IPv4 Static Routes
Name
Enter the Name of the static route to be configured.
Enabled
Select whether to enable or disable this static route.
Group
Choose the LAN’s Network Group, which will be using this static route.
Target Network/Host
Enter the Network/Host IP address on which to route the traffic to.
Example: 192.168.5.0
Netmask
Enter the Network/Host Netmask.
Example: 255.255.255.0
NextHop
Enter the NextHop IP address.
Example: 192.168.5.1.
Metric
Set the metric value. The valid range is 0-255. Default value is 1.
Table 12: IPv6 Static Routes
Name
Enter the Name of the static route to be configured.
Enable
Select whether to enable or disable this static route.
Group
Choose the LAN’s Network Group
Target Network/Host
Enter the Network/Host IP address on which to route the traffic to.
2001:db8:3c4d:4::/64
NextHop
Enter the Gateway’s IP address.
fec0:470:28:5b2::1/64
Metric
Set the metric value. The valid range is 0-255. Default value is 1.
QoS
The GWN7000 offers the possibility to enable and configure QoS on both WAN and LAN interfaces, this
will help to manage in more depth the network traffic to define priority and classify different services and
protocols in a scheduled manner.
Figure 11: QoS