User Guide

ManualsBrandsGrandstream ManualsComputers & AccessoriesGrandstream Enterprise Multi-WAN Gigabit VPN Router (GS-GWN7000)

P a g e | 31

GWN7000 User Manual

Version 1.0.4.23

Interface

Select the WAN interface from which the traffic will be classified, make sure to

enable the desired interface it from QoS Basic in order to appear.

Upstream

Set Upstream bandwidth value. The value should end with “Mbit”, “Kbit” or with no

unit if the set value is referring to “bit” unit.

Note that the sum of created classes should have upstream bandwidth speeds

lower than the Upstream bandwidth value configured on QoS Basic.

Examples: 100Mbit

100Kbit

500

Traffic Filter

Class

Select a class from created traffic classes using drop-down menu.

Name

Define a Name for the traffic filter rule.

DSCP

Choose the Differentiated Services Code Point (DSCP) value from drop-down list.

Default is 0.

IP Source Address

Specify the Source IP address from which the traffic filter rule will be applied.

IP Destination

Address

Specify the Destination IP address to which the traffic filter rule will be applied.

TCP Source Port

Specify the TCP Source port from which the traffic filter rule will be applied.

TCP Destination Port

Specify the TCP Source port to which the traffic filter rule will be applied.

UDP Source Port

Specify the UDP Source port from which the traffic filter rule will be applied.

UDP Destination Port

Specify the UDP Source port to which the traffic filter rule will be applied.

Group Source

Choose the LAN group of the specified Source IP address. If no Source IP address

has been defined, the rule will be applied to all members of that LAN group.

Table 15: QoS Policer

Name

Define a Name for the Policer rule.

Interface

Select an interface from which the traffic will be policed, make sure to enable the

desired interface it from QoS Basic in order to appear.

Priority

Set the priority of the traffic class, the lower the value, the highest the priority. Valid

range is between 1 and 64.

Rate

Set a Rate value for download bandwidth when applying policer rule.

DSCP

Choose the Differentiated Services Code Point (DSCP) value from drop-down list.

Default is 0.

IP Source Address

Specify the Source IP address from which the policer rule will be applied.

IP Destination

Address

Specify the Destination IP address to which the policer rule will be applied.

TCP Source Port

Specify the TCP Source port from which the policer rule will be applied.

TCP Destination Port

Specify the TCP Source port to which the policer rule will be applied.