User Guide

P a g e | 33
GWN7000 User Manual
Version 1.0.4.23
Ignore DSCP on
ingress
Select whether to ignore DSCP on ingress packets or not. By default, this option
is disabled.
ECN Status on
Inbound packets
Select whether to set or not ECN status on inbound packets.
DDNS
DDNS allows accessing GWN7000 via domain name instead of IP address, the GWN7000 supports
following DDNS providers:
• Dyndns.org
• Changeip.com
• Zoneedit.com
• Free.editdns.net
• Freedns.afraid.org
• He.Net
• Dnsomatic.Com
• No-ip.pl
• Myonlineportal.net
Before configuring DDNS settings on the GWN7000, make sure first to create and confirm the DDNS
account via supported providers.
Following steps illustrates how to configure the DDNS settings on your GWN7000:
1. Access to GWN7000 web GUI, and navigate to RouterDDNS, and enable DDNS service.
2. Fill in the domain name created with DDNS provider under Domain Name field.
3. Enter your account username and password under Username and Password fields.
4. Specify the WAN interface to which DDNS is applied under Network interface field.
5. (Optional) For advanced configuration, it is also possible log to Syslog and modify the values of
refreshing fields so to check periodically the updated IP address.
DPI
DPI stands for Deep Packet Inspection which is an option that allows the GWN7000 to analyze the core of
the packet to collect and report information at the Application-layer, such as traffic volume of an application
used by the host.
Snort OpenApp ID allows the System Administrator to view the internet traffic of users. The GUI displays
traffic data in a human-readable format, such as 'Streaming MP4 & Netflix - 31% of total traffic usage.' The
data is accompanied by a graph.