User Guide

P a g e | 34
GWN7000 User Manual
Version 1.0.4.23
GWN7000 is using Snort for packet inspection and displays traffic status under StatusApplication
Traffic as shown on the figure below.
Figure 12: DPI Status
The following table contains the description of the DPI configuration settings.
Table 17: DPI Settings
Enable Application
Tracking
Enables the application tracking. By default, it’s disabled.
Interface
Select the interface on which the application tracking will be performed. By default,
it’s WAN Port 1.
Note: A reboot is required after enabling Depp packet inspection in order for the feature to take effect.