User Guide

P a g e | 79
GWN7000 User Manual
Version 1.0.4.23
Client Start Address
Configure the remote client IP start address.
Note: this address should be in the same subnet as the end address
and PPTP server address.
Client End Address
Configure the remote client IP end address.
Note: this address should be in the same subnet as the start address
and PPTP server address.
Allow Forwarding between
Site-To-Site VPNs
This option allows forwarding between multiple site-to-site VPNs. i.e.
if there are multiple PPTP users configured with client subnet
enabled, then this option allows one PPTP client subnet to access
another PPTP client subnet through the server.
Note: for this option to work more than one PPTP users with client
subnet must be enabled.
MPPE
Enable / disable the MPPE for data encryption. By default, it’s
disabled.
Auto Forward group traffic
Configures if enable group traffic forwards to be automatic. If
enabled, users should choose which groups they want to forward, if
not, users can still do it manually via forwarding rules under firewall
settings.
Note: if cancel check, the previous group settings will be cleared,
user need to re-configure the groups.
Network Group
Configure the network group to access VPN connection, you can
choose more than one network group at the same time.
2- Click after completing all the fields.
3- Click on top of the web GUI to apply changes.
After this step, you need to create user accounts under web GUI  System Settings  User Manager in
order to connected to the configured PPTP server.