User Guide

P a g e | 81
GWN7000 User Manual
Version 1.0.4.23
Figure 51: Port Forward
Refer to following table for Port Forwarding option when editing or creating a port-forwarding rule:
Table 30: Port Forward
Name
Specify a name for the port forward rule.
Enabled
Check to enable this port forward rule.
Protocol
Select a protocol, users can select TCP, UDP or TCP/UDP.
Source Group
Select the WAN Interface.
Source Port
Set the Source Port number.
Destination Group
Select the LAN group.
Destination IP
Set the destination IP address.
Destination Port
Set the Destination Port number.
DMZ
GWN7000 support DMZ, where it is possible to specify a LAN client to be put on the DMZ.
• To add an IP into the DMZ, click on .
• To edit a DMZ entry, click on .
• To delete a DMZ entry, click on .