User Guide

P a g e | 82
GWN7000 User Manual
Version 1.0.4.23
Figure 52: DMZ
Refer to below table for DMZ fields:
Table 31: DMZ
Name
Specify a name for the DMZ entry.
Enabled
Check to enable this DMZ entry.
Source Group
Select the WAN interface
Destination Group
Select the LAN group.
Destination IP
Set the destination IP address.
Inter-Group Traffic Forwarding
GWN7000 offers the possibility to allow traffic between different groups and interfaces.
Users can select to edit a source group and add to it other network groups and WAN interfaces to allow
inter-group traffic between the selected members.
Figure 53: Inter-group Traffic Forwarding
Click on next to source group, and click on to add groups and interfaces to selected groups, or
click on to remove members from selected groups as shown in below figure