User Guide

P a g e | 83
GWN7000 User Manual
Version 1.0.4.23
Figure 54: Enabling inter-group traffic
UPnP
GWN7000 supports UPnP that enables programs running on a host to configure automatically port
forwarding.
UPnP allows a program to make the GWN7000 to open necessary ports, without any intervention from the
user, without making any check.
UPnP settings can be accessed from GWN7000 WebGUIFirewallBasicUPnP Settings.
Refer to below Table for UPnP settings.
Table 32: UPnP Settings
Enable Daemon
Check to enable Daemon for UPnP.
External Interface
Select the WAN interface to allow external connection to resources that
enables UPnP.
Internal Interface
Check the LAN network group on which to activate UPnP.
Enable UPnP
Check to Enable UPnP for the LAN clients on selected network group.
Enable NAT-PMP
Check to enable automatic NAT Port Mapping (NAT-PMP).
Secure Mode
Check to activate secure mode for devices that activate UPnP.
Logging to Syslog
Choose whether to log activities for UPnP into Syslog.
Download Speed
Set the Download speed value in KB/s. Default is 2048
Upload Speed
Set the Upload speed value in KB/s. Default is 1024.