User Guide

P a g e | 84
GWN7000 User Manual
Version 1.0.4.23
Traffic Rules Settings
GWN7000 offers the possibility to fully control incoming/outgoing traffic for different protocols in customized
scheduled times, and taking actions for specified rules such as Accept; Reject and Drop.
Following actions are available to configure Input, output and forward rules for configured protocols
• To add new rule, Click on .
• To edit a rule, Click on .
• To delete a rule, Click on .
Figure 55: Traffic Rules Settings
Refer to below table for each tab, when editing or creating a traffic rule:
Table 33: Firewall Traffic Rules
Name
Specify a name for the traffic rule.
Enabled
Check to enable this rule.
IP Family
Select the IP version, three options are available: IPv4, IPv6 or Any.
Source Group
Select a WAN interface or a LAN group for Source Group, or select All.
Protocol
Select one of the protocols from dropdown list or All, available options
are: UDP, TCP, TCP/UCP, UDP-Lite, ICMP, AH, SCTP, IGMP and All.
Source IP Address
Set the Source IP address, it can be an IPv4 or IPv6 address.