User Guide

P a g e | 99
GWN7000 User Manual
Version 1.0.4.23
Click on to show the captured files on a chosen device, and the capture files details will
appear, click on to delete all files, click on next to a capture file to download it on a local
folder, or click on to delete it.
Figure 63: Capture Files
The below table will show different fields used on capture page
Table 40: Debug-Capture
File Name
Enter the name of the capture file that will be generated.
Interface
Choose an Interface (WAN port1 or 2, or a network group) from where to begin the
capture.
Device
Choose a device plugged to USB port to save the capture once started.
File Size
Set a File size that the capture will not exceed (Optional field).
Rotate Count
Set a value for rotating captures (Optional Field).
Direction
Choose if you want to get all traffic or only outgoing or incoming to the choses
interface.
Source Port
Set the Source Port to filter capture traffic coming from the defined source port.
Destination Port
Set the Destination Port to filter capture traffic coming from the defined port.
Source IP
Set the Source IP to filter capture traffic coming from the defined source IP.
Dest IP
Set the Destination IP to filter capture traffic coming from the defined destination
IP.
Protocol
Choose ALL or a specific protocol to capture (IP, ARP, RARP, TCP, UDP, ICMP,
IPv6)
Ping/Traceroute
Ping and Traceroute are useful debugging tools to verify reachability with other clients across the network
(WAN or LAN). The GWN7000 offers both Ping and Traceroute tools for IPv4 and IPv6 protocols.