User Manual

Grandstream Networks, Inc. GXV3500 User Manual Page 29 of 82
Firmware Version 1.0.1.94 Last Updated: 05/2016
GXV3500 HOME WEB PAGE (ENCODER MODE)
Figure 8: Home Page of GXV3500 (Encoder Mode)
1. View Size : Click to switch between real resolution size and embedded window size video.
2. ZOOM: Zoom In/Out during PTZ operation (when connected to supported camera)
3. BRIGHTNESS bar: Adjust the image or video brightness.
4. CONTRAST bar: Adjust the image or video contrast.
5. SATURATION bar: Adjust the image or video saturation.
6. Language icon Click to switch webpage language.
(Current support: Chinese, English and Russian)
7. Configuration icon: Click to enter “Configuration Page” to configure the parameters of
GXV3500 (Administration privilege required).
8. Decode Home Page: Click to switch to Decode Mode (Reboot required to take effect).
9. Default Video Parameter icon: Click to reset video parameters (Brightness, Contrast, Saturation) to default.
10. Stop/Play Video icon: Click to Stop and Play the embedded live video.
11. Capture (Snapshot) icon Click to capture and save a snapshot of current displayed video frame.
Default directory: C:\Capture, using date stamp as folder name.
12. Record icon: Click to Start/Stop record of current video stream into a file.
Default directory: C:\Record
13. Listen On/Off icon: Toggle to listen/stop audio from the camera’s microphone
14. Talk On/Off icon: Toggle to talk to camera’s speaker (computer microphone required)
15. Playback: Click to playback the recorded video file.
16. Local Configuration: Click to configure the file path of snapshot and recorded video files.
Also adjust the video delay or smoothness.
17. Motion Detection Alarm Indicator: If (configured) motion detection alarm triggered, the indicator will flash in red.
Click the indicator icon to turn off the alarm indication.
18. DI, Alarm_In icon: The indicator will be on when there is an external Alarm Input.
Click the indicator icon to turn off the alarm indication.
19. DO, Alarm_Out icon: Click the indicator icon manually switch the Alarm_Out operation.