User Manual

Grandstream Networks, Inc. GXV3500 User Manual Page 53 of 82
Firmware Version 1.0.1.94 Last Updated: 05/2016
Alarm Event
This page allows user to configure the Alarm_In event and related actions.
Figure 24-1: Alarm_In Action Configuration Page
DI Alarm Action Setting:
 Pre/Post Alarm Recording (Record Video From Pre Alarm Up to XXX to After Up to XXX):
Depending on 1
st
stream resolution, this allows internal buffer to store the
pre/post alarm video for applications to utilize.
 Voice Alarm to SIP Phone:
Enabled will allow device to make SIP call after receiving Alarm_In.
See below NOTE for example.
 Alarm Output: Enabled will allow Alarm Output after receiving Alarm_In signal.
 Upload to Alarm Center: Upload to alarm center like 3
rd
party VMS system.
 Upload to Alarm HTTP Server:
Upload to 3
rd
party HTTP server or application using HTTP API.
 Record Video and Upload to FTP Server:
Upload video recording to pre-configured FTP server.