User Manual

FIRMWARE VERSION 1.0.8.2 HT70X USER MANUAL Page 34 of 52
Always send HTTP
Basic Authentication
Information
Default is Send HTTP Basic Authentication Information only when challenged. If set to
Always, device will send configured user name and password within HTTP request without
server sending authentication challenge.
Firmware File Prefix
Default is blank. If configured, HT701 will request firmware file with the prefix. This setting
is useful for ITSPs. End user should keep it blank.
Firmware File Postfix
Default is blank. End user should keep it blank.
Config File Prefix
Default is blank. End user should keep it blank.
Config File Postfix
Default is blank. End user should keep it blank.
Allow DHCP Option 66
or 160 to override
server
If set to “Yes”, configuration and upgrade server information can be obtained using DHCP
option 66 or option 160 from DHCP server located in customer’s environment. Default
setting is Yes.
3CX Auto Provision
Enables automatic provision feature on the phone when 3CX is used as the SIP server. The
default setting is "Yes".
Automatic Upgrade
Choose “Yes” to enable automatic upgrade and provisioning. If select “Check every
minutes” input the amount of minutes you want it to check for update. If select “Yes, daily
at hour” make sure to input the hour of the day you want it to check for update, e.g. for 11
pm type 23. If select “Yes, weekly on day” make sure you input the day of the week (in
format 0-6, 0 is Sunday) you want it to check for update. When set to No, HT70X will only
do the following option you select; “Always check for New Firmware at Boot up” will check
for new firmware every time the device reboots. “Check New Firmware only when F/W
pre/suffix changes” will check for updates only when the pre/suffix has been changed.
Authenticate Conf File
If set to Yes, config file is authenticated before acceptance. This protects the configuration
from an unauthorized change.
SIP TLS Certificate
The user specify SSL certificate used for SIP over TLS in X.509 format.
SIP TLS Private Key
The user specify SSL private key used for SIP over TLS in X.509 format.
SIP TLS Private Key
Password
User specify password to protect the private key above.
ACS URL
User specify the Auto Configuration Server’s URL (TR-069 protocol)
ACS Username
User specify the ACS Username
ACS Password
User specify the ACS password
Periodic Inform
Enable
Default is No. If set to YES, device will send inform packets to the ACS