User Guide
Table Of Contents
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- CONFIGURATION GUIDE
- Obtain HT801/HT802 IP Address via Connected Analogue Phone
- Understanding HT801/HT802 Interactive Voice Prompt Response Menu
- Configuration via Web Browser
- NAT Settings
- DTMF Methods
- Preferred Vocoder (Codec)
- Configuring the HT801/HT802 Through Voice Prompts
- Register a SIP Account
- Rebooting the HT801/HT802 from Remote
- CALL FEATURES
- CALL OPERATIONS
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING HT801/HT802
P a g e | 16
HT801/HT802 User Guide
Version 1.0.5.11
Table 4: HT801/HT802 LEDs Pattern Description
LED Lights
Status
Power LED
The Power LED lights up when the HT801/HT802 is powered on and it
flashes when the HT801/HT802 is booting up.
Internet LED
The Ethernet LED lights up when the HT801/HT802 is connected to your
network through the Ethernet port and it flashes when there is data being
sent or received.
Phone LED for HT801
Phone LED 1&2 for
HT802
The phone LED 1 & 2 indicates status of the respective FXS Ports-phone on
the back panel
• OFF - Unregistered
• ON (Solid Blue) - Registered and Available
• Blinking every second - Off-Hook / Busy
• Slow blinking - FXS LEDs indicates voicemail