Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 - 9300 Fax: +1 (617) 249 - 1987 www.grandstream.com GSC3506 SIP/Multicast Intercom Speaker Quick Installation Guide please visit www.grandstream.
Content English................................................................................
EN The GSC3506 is not pre-configured to support or make emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is your responsibility to purchase SIP-compliant Internet telephone service, properly configure the GSC3506 to use that service, and periodically test your configuration to confirm that it works as you expect.
GSC3506 PORTS AND BUTTONS Installation using Ceiling Bracket Kit (*sold separately) 4 5 Fix the Ceiling Bracket using the screws from the kit as show in the illustration. Ceiling hole 406~605mm （16~23.8in） 2 3 1 Front panel Back panel NO. Label Description USB Port USB2.0, External USB Storage 2 NET/PoE Ethernet RJ45 port (10/100Mbps) supporting PoE/ PoE+. 3 2-Pin port 2-pin switch-in input port Alarm-in input port (Access voltage 5V to 12V) 4 Reset Factory reset button.
Boom Mount POWERING AND CONNECTING GSC3506 GSC3506 can be powered on using PoE/PoE+ switch or PoE injector using following steps: 1. Fix the Boom in the ceiling. Step 1: Plug a RJ45 Ethernet cable into the network port of the GSC3506. 1 2. To ensure safety, install first Boom (not provided) the anti-fall ropes. Step 2: Plug the other end into the power over Ethernet (PoE) switch or PoE injector. Note: It is recommended to use PoE+ power supply to achieve the best audio effect.
U.S. FCC Part 15 Regulatory Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: —Consult the dealer or an experienced radio/TV technician for help. CAN ICES-003 (B)/NMB-003(B) (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
