Quick Installation Guide

~3~ ~4~
PWB3.5 x 6 x 8mm
PA3.5 x 33mm
Device Installation:
GSC3570 SETUP
1. Locate the equipment holder on the de-
sired position. Drill four holes on the wall
referring to the positions of the ones on the
metal bracket. Then, x a Screw Anchor in
each hole.
2. Fix the metal bracket on the wall by Self-
tapping Screws.
3. Plug in the cables to the proper GSC3570
ports on the back.
4. Align the position slots on device’s back
with their correct placement on the Metal
Bracket, then x it by pushing Down.
5. Plug in the Self-tapping Screws at bottom
to attach the device to the metal bracket.
The GSC3570 can be mounted on the wall or on the desktop (desktop brack-
et is sold separately). Please refer to the following steps for Wall installation:
1
3
4
Home Button
LED
LAN/PoE
Micro SD
Micro USB
10-PIN
Connector
Speakers
Touch screen
On-Wall Mount:
In-Wall Mount:
2
5
1. Locate the box screw holes and align them
with the metal bracket holes. Then, x a
Self-tapping Screw on each hole.
Below is the supported Box dimensions:
• 80mm x 80mm
• 71mm x 115mm
• 115mm x 115mm
2. Plug in the cables to the proper GSC3570
ports on the back.
3. Align the position slots on device’s back
with their correct placement on the Metal
Bracket, then x it by pushing Down.
4. Plug in the Self-tapping Screws at bottom
to attach the device to the metal bracket.
PWB3.5 x 6 x 8mm
115mm
115mm
1
2
3
4
115mm
71mm
80mm
80mm
OR
OR
GSC3570 Ports:
J1
J2
J3
J4