Guide

GWN Cloud Application User Manual
Version 1.0.0.2
P a g e | 12
ACCESS POINTS
The access points (AP) tab displays the list of access points paired with GWN cloud for each Network/SSID
and allows users to add new GWN76XX access points.
Adding New Access Points
To add an Access point to GWN Cloud, the administrator needs two information:
• MAC address of the Access Point.
• WiFi Password in the back of the unit.
Note: GWN76xx Access Points need to be using firmware 1.0.6.23 or higher. If GWN76xx is using older
firmware, make sure to upgrade them before adding them to GWN Cloud.
There are 2 methods to add GWN76xx to the cloud using GWN App:
• Method 1: Adding New AP Manually
• Method 2: Adding New AP by scanning Barcode
Method 1: Adding New AP Manually
1. Locate the MAC address on the MAC tag of the unit, which is on the underside of the device, or on
the package.
2. Locate the WiFi Password.
Figure 5: GWN Access Point MAC and WiFi Password