Guide

GWN Cloud Application User Manual
Version 1.0.0.2
P a g e | 13
3. From APs tab, click on button and select Manual Add, then enter AP’s information:
Figure 6 : Manual Add
The following table describes required parameters to add new AP to GWN Cloud using GWN App.
Table 1 : Adding New AP manually
Section
Description
Name
Enter a name for the new Access points to identify it easily.
MAC
Enter the MAC address of the new Access Point.
Password
Enter the WIFI Password.
Method 2: Adding New AP by scanning Barcode
New Access Points can also be added to GWN Cloud by Scanning the Barcode from the Access point’s
sticker using mobile phone camera.
1. From APs tab click on button and select Scan Add, then point the mobile phone camera to
the AP’s sticker.