Grandstream Networks, Inc.
Table of Contents Local AP Upgrade.......................................................................................................... 3 Before upgrade ...................................................................................................................................... 3 Start upgrade ......................................................................................................................................... 3 Transfer AP to GWN Cloud .....................................
Local AP Upgrade First thing to do is to upgrade your AP firmware from version 1.0.5.x to Cloud version 1.0.6.37 for GWN 7600&7600LR or 1.0.6.40 for GWN7610. Before upgrade I. Please make sure all APs including Master and Slaves are all online. II. Please backup your configurations by steps below: 1. Login master AP’s web. 2. Navigate to page System Settings → Maintenance → Upgrade. 3. Use “Download Configuration” to download a backup configuration file to your PC.
3. Navigate to page “Access Point”. 4. Check all slave APs 5. Click “Upgrade” to trigger upgrade of all checked APs. 6. Navigate to System Settings → Maintenance → Upgrade. 7. Click on “Upgrade” to upgrade master. 8. After master AP finish upgrading, re-login its web. At this moment, you will be able to see all APs are on 1.0.6.37 or 1.0.6.40 in “Access Points” page. Now, you can start to transfer your APs on to GWN Cloud.
4. Click on Tag “Customized Version”. 5. Use “Click to upload the BIN file” to upload gwn7610fw.bin of 1.0.5.x on to GWN Cloud. 6. After finishing upload, go back to Device page. 7. Check the APs that you need to downgrade. 8. After at least one AP is checked, “Upgrade” button will light up. Click “Upgrade” and choose your customized firmware to perform downgrade.
