User's Manual

P a g e | 30
GWN7602 User Manual
Version 1.0.3.4
Once this is done, this access list can be used under SSID Wi-Fi settings to filter clients either using
whitelist or blacklist mode.
Figure 15: Blacklist Access List
Time Policy
The timed client disconnect feature allows the system administrator to set a fixed time for which clients
should be allowed to connect to the access point, after which the client will no longer be allowed to connect
for a user configurable cool-down period.
The configuration is based on a policy where the administrator can set the amount of time for which clients
are allowed to connect to the Wi-Fi and reconnect type and value after which they will be allowed to
connect back after they have been disconnected.
To create a new policy, go under Clients→Time Policy and add new one. then set the following
parameters:
Table 5: Time Policy Parameters
Option
Description
Name
Enter the name of the policy
Enabled
Check the box to enable the policy
Limit Client Connection Time
Sets amount of time a client may be connected.
Client Reconnect Timeout Type
Select the method with which we will reset a client’s connection timer
so they may reconnect again. Options are: