Grandstream Networks, Inc.
GXP2120/GXP2110/GXP2100/GXP14xx User Manual Index GUI INTERFACE EXAMPLES ...................................................................... 5 GNU GPL INFORMATION ............................................................................ 6 CHANGE LOG ............................................................................................... 7 FIRMWARE VERSION 1.0.5.15 .......................................................................................................... 7 FIRMWARE VERSION 1.0.4.
MUTE ......................................................................................................................................... 31 CALL TRANSFER ...................................................................................................................... 31 5-WAY CONFERENCING/3-WAY CONFERENCING ................................................................. 32 VOICE MESSAGES (MESSAGE WAITING INDICATOR) ..........................................................
Table of Tables GXP2120/GXP2110/GXP2100/GXP14xx User Manual Table 1: GXP2120/GXP2110/GXP2100/GXP14xx FEATURES IN A GLANCE ......................................... 10 Table 2: GXP2120/GXP2110/GXP2100/GXP14xx COMPARISON GUIDE ................................................11 Table 3: GXP2120/GXP2110/GXP2100/GXP14xx TECHNICAL SPECIFICATIONS..................................11 Table 4: GXP2120/GXP2110/GXP2100/GXP14xx EQUIPMENT PACKAGING ........................................
GUI INTERFACE EXAMPLES http://www.grandstream.com/products/gxp_series/general/documents/gxp21xx_gui.zip 1. Screenshot of Login Page 2. Screenshots of Status Pages 3. Screenshots of Accounts Pages 4. Screenshots of Settings Pages 5. Screenshots of Network Pages 6. Screenshots of Maintenance Pages 7. Screenshots of Phonebook Pages FIRMWARE VERSION 1.0.5.
GNU GPL INFORMATION GXP2120/GXP2110/GXP2100/GXP14xx firmware contains third-party software licensed under the GNU General Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public License (GPL) for the exact terms and conditions of the license. Grandstream GNU GPL related source code can be downloaded from Grandstream web site from: http://www.grandstream.com/support/faq/gnu_gpl. FIRMWARE VERSION 1.0.5.
CHANGE LOG This section documents significant changes from previous versions of user manuals for GXP2120/GXP2110/GXP2100/GXP14xx. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. FIRMWARE VERSION 1.0.5.15 • Updated Web GUI interface examples with new screenshots for 1.0.5.15. [GUI INTERFACE EXAMPLES] • Merged GXP140x user manual content in this manual. • Add pin-out information.
FIRMWARE VERSION 1.0.4.9 • Added instructions for connecting the phone. [CONNECTING YOUR PHONE] • Updated Keypad MENU options and Keypad configuration flow. [CONFIGURATION VIA KEYPAD] • Added Line Key options Speed Dial, Dial DTMF, Call Return, Transfer, Voice Mail, Intercom, Call Park, LDAP Search, and etc. [SETTINGS PAGE] • Added Multi Purpose Key options Voice Mail, Call Park, LDAP Search, and etc. [SETTINGS PAGE] • Added IPv6 configuration options.
WELCOME Thank you for purchasing Grandstream GXP2120/GXP2110/GXP2100/GXP14xx SIP Enterprise Phones. Your Grandstream GXP2120/GXP2110/GXP2100/GXP14xx Enterprise IP phone is feature-enriched, sophisticated, yet simple to use.
PRODUCT OVERVIEW FEATURE HIGHTLIGHTS Table 1: GXP2120/GXP2110/GXP2100/GXP14xx FEATURES IN A GLANCE GXP2120 GXP2110 GXP2100 GXP1450 GXP140x FIRMWARE VERSION 1.0.5.
Table 2: GXP2120/GXP2110/GXP2100/GXP14xx COMPARISON GUIDE Features GXP2120 GXP2110 GXP2100 GXP1450 GXP140x LCD Display 320x160 pixel 240x120 pixel 180x90 pixel 180x60 pixel 128x40 pixel LCD Backlight Yes Yes Yes Yes No 6 4 4 2 2 7 18 7 N/A N/A 4 3 3 3 3 Yes, Yes, up to 2 EXT Boards, up to 2 EXT Boards, N/A N/A N/A 56 nodes each 56 nodes each Number of Lines Programmable Hard Keys Programmable Soft Keys Extension Module GXP2120/GXP2110/GXP2100/GXP14xx TECHNICAL SPE
LCD size and backlight: Graphic Display GXP2120 GXP2110 GXP2100 GXP1450 GXP140x 320x160 pixel 240x120 pixel 180x90 pixel 180x60 pixel 128x40 pixel Backlight Backlight Backlight Backlight No Backlight Feature key comparison: Feature Keys GXP2120 GXP2110 GXP2100 GXP1450 GXP140x HOLD Yes Yes Yes Yes Yes SPEAKER Yes Yes Yes Yes Yes SEND Yes Yes Yes Yes Yes TRANSFER Yes Yes Yes Yes Yes CONF Yes Yes Yes Yes Yes MUTE Yes Yes Yes Idle: DND Idle: DND DND Y
call log (up to 2000 records for GXP2120/GXP2110/GXP2100, up to 500 records for GXP14xx), XML customization of idle screen, off-hook auto dial, auto answer, click-to-dial, flexible dial plan, hot desking, personalized music ringtones, server redundancy and fail-over HD Audio Headset Jack Yes, HD handset with support for wideband audio For GXP2120/GXP2110/GXP2100/1450: 2.
Content mount spacers, universal power supply, network cable, quick start guide FCC Part 15 (CFR 47) Class B; EN55022 Class B, EN55024, EN61000-3-2, Compliance EN61000-3-3, EN60950-1; AS/NZS CISPR 22 Class B, AS/NZS CISPR 24, RoHS; UL 60950 (power adapter) FIRMWARE VERSION 1.0.5.
INSTALLATION EQUIPMENT PACKAGING Table 4: GXP2120/GXP2110/GXP2100/GXP14xx EQUIPMENT PACKAGING Main Case Yes 1 Handset Yes 1 Phone Cord Yes 1 Power Adaptor Yes 1 Ethernet Cable Yes 1 Phone Stand Yes Wall Mount Spacers Yes 2 Quick Start Guide Yes 1 2 for GXP2120/GXP2110/GXP2100/1450; 1 for GXP140x CONNECTING YOUR PHONE Table 5: GXP2120/GXP2110/GXP2100/GXP14xx CONNECTORS Handset Port RJ9 Headset Port 2.
5. The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for the date/time display to show up; 6. Using the keypad configuration menu or phone's embedded web server (Web GUI) by entering the IP address in web browser, you can further configure the phone. Please see below the pin-out information for GXP2120/GXP2110/GXP2100/14xx. GXP2120/GXP2110/GXP2100/GXP14xx GXP2120/GXP2110/GXP2100/GXP1450 Handset/Headset Jack 2.
GXP2120 with 2 GXP EXT Boards GXP EXT Board Reverse side of connection with connection GXP2120/2110 has a special port on plate the back Figure 2: GXP2120/GXP2110 EXT Board Connection Connect the first GXP EXT board to the GXP2120/2110 using the connection cable found in the GXP EXT board package. The first GXP EXT board draws power directly from the phone. Connect the second GXP EXT board using the connection plate and the connection cable.
SAFETY COMPLIANCES The GXP2120/GXP2110/GXP2100/GXP14xx phone complies with FCC/CE and various safety standards. The GXP2120/GXP2110/GXP2100/GXP14xx power adapter is compliant with the UL standard. Use the universal power adapter provided with the GXP2120/GXP2110/GXP2100/GXP14xx package only. The manufacturer’s warranty does not cover damages to the phone caused by unsupported power adapters.
USING THE GXP2120/GXP2110/GXP2100/GXP14xx GETTING FAMILAR WITH THE LCD GXP2120/GXP2110/GXP2100/GXP14xx has a dynamic and customizable screen. The screen displays differently depending on whether the phone is idle or in use (active). The following table describes the items displayed on the GXP2120/GXP2110/GXP2100/GXP14xx idle screen. Table 6: LCD DISPLAY DEFINITIONS DATE AND TIME Displays the current date and time. It can be synchronized with Internet time servers. Displays company logo/name.
toggle among default idle screen, weather information, IP Address and the SIP extension number. • ForwardAll Unconditionally forwards the phone line (account 1) to another phone. • MissedCalls Shows up unanswered calls to this phone. • Redial Redials the last dialed number when there is existed dialed call log. Note: If XML application is used for GXP2120/GXP2110/GXP2100, the softkey for XML application will show up in the default idle screen as configured.
entering transfer target number. Press Transfer softkey to do blind transfer. • Split In auto-attended transfer mode, after establishing the second call, press Split to quit transfer and go back to normal talking status. • ConfCall Conferences the active calls. • ReConf Re-establish the conference among the calls on hold. Call Parking: Please refer to GXE5024/5028 Online User Manual for more information. • CallPark When the phone dials out, the Call Park softkey will display on screen.
Table 7: GXP2120/GXP2110/GXP2100/1450 LCD ICONS DND Status. OFF - Do Not Disturb disabled ON - Do Not Disturb enabled Call Forward All Status. OFF - Call Forward All feature disabled ON - Call Forward All feature enabled Call Forward Busy Status. OFF - Call Forward Busy feature disabled ON - Call Forward Busy feature enabled Call Forward No Answer Status. OFF - Call Forward No Answer feature disabled ON - Call Forward No Answer feature enabled Call Forward All and Call Forward No Answer Status.
ON - Network connection is down Missed Call Status. OFF - No missed call ON - New missed call Save Call Record Status. OFF - No saving call record activity ON - The phone is writing the call records into the flash at the moment Waiting For Response. Please wait for the phone to response before the keypad entry Handset Status. OFF - handset on hook ON - handset off hook Speaker Status. OFF - speaker off ON - speaker on Headset Status. OFF - headset off ON - headset on Calling Out.
MUTE Status. OFF - No muted ON - Muted Call On Hold. Call Active. Conference Call. Core Dump. Core dump file can be downloaded from phone's Web GUI->Status page. Table 8: GXP140x LCD ICONS Registration Status: Registered. Registration Status: Not Registered. Handset Status. OFF - handset on hook ON - handset off hook Speaker Status. OFF - speaker off ON - speaker on Headset Status. OFF - headset off ON - headset on DND Status. OFF - Do Not Disturb disabled ON - Do Not Disturb enabled Call Forward Status.
ON - The active call is muted SRTP Status. OFF - SRTP is not used ON - SRTP is used GETTING FAMILAR WITH THE KEYPAD The following table describes the buttons used on the GXP2120/GXP2110/GXP2100/GXP14xx keypad. Table 9: KEYPAD DEFINITIONS GXP2120/GXP2110/GXP2100 GXP1450 GXP140x LINE KEYS LINE KEYS LINE 1/LINE 2 HOLD HOLD HOLD Definition Open or switch line; resume the call on hold. Place active call on hold, or resume the call on hold. Send out the number, or SEND redial.
• Press the 4 navigation keys to move up/down/left/right; NAVIGATION KEYS/MENU • Press the round button in the center for MENU/ENTER/OK PHONEBOOK N/A Phonebook/Contacts. Volume (For GXP2100/GXP14xx only). For GXP2120/GXP2110, press UP or DOWN button to adjust the volume when the phone is on hook. N/A Voicemail. Standard phone keypad. 0 - 9, *, # Configure key mode and User ID to use the Multi N/A MULTI PURPOSE KEYS N/A Purpose key as Speed Dial, BLF, Call Park and etc.
of independent SIP server, user and NAT settings. Each of the line buttons is "virtually" mapped to an individual SIP account. In off hook state, select an idle line and the dial tone will be heard. To make a call, select the line you wish to use. The corresponding LINE LED will light up in green. The user can switch lines before dialing any number by pressing the LINE buttons.
Press an available LINE key to activate speaker; or When the phone is in idle; • Press SEND key, or the REDIAL softkey. Via Call History. Dial the number logged in phone's call history. Press MENU button to bring up the main menu; Enter Call History and select "Answered Calls", "Missed Calls", "Transferred Calls" or "Forwarded Calls"; • • Select the entry you would like to call using the navigation arrow keys; Press SEND button to dial out. Via Phonebook.
Note: • After entering the number, the phone waits for the No Key Entry Timeout (Default timeout is 4 seconds, configurable via Web GUI) before dialing out. Press SEND or # key to override the No Key Entry Timeout; • If digits have been entered after handset is off hook, the SEND key will works as SEND instead of REDIAL; • By default, # can be used as SEND to dial the number out.
Quick IP Call Mode: The GXP2120/GXP2110/GXP2100/GXP14xx also supports Quick IP Call mode. This enables the phone to make direct IP calls using only the last few digits (last octet) of the target phone's IP address. This is possible only if both phones are under the same LAN/VPN. This simulates a PBX function using the CMSA/CD without a SIP server. Controlled static IP usage is recommended. To enable Quick IP Call Mode, go to phone's Web GUI->Settings->Call Features, set "Use Quick IP Call Mode" to "Yes".
DO NOT DISTURB Do Not Disturb can be enabled/disabled from phone's LCD. For GXP2120/GXP2110, press the DND button on the phone when the phone is in idle. For GXP14xx, press the MUTE button for DND function while the phone is in idle.
• • • Blind Transfer. During the first active call, press TRAN key and dial the number to transfer to; Press SEND key or # to complete transfer of active call. Attended Transfer. During the first active call, press LINE key. The first call will be put on hold; Enter the number for the second call in the new line and establish the call; Press TRAN key; Press the other LINE key which is on hold to transfer the call. Auto-Attended Transfer.
GXP14xx can host 3-way conference call with other 2 parties (PCMU/PCMA). • • Initiate a conference call. Establish calls with 2 or more parties respectively; While 1 call is active, the other call will be put on hold with its LINE key blinking in green; Press CONF key; Press the desired LINE key on hold, the conference will be established; Repeat the previous 2 steps for all the other parties on hold to join the conference. Cancel Conference.
• • Join more parties in established conference call. Establish conference call; Press CONF key and a new line will be brought up using the same account; Dial the number and press SEND key to establish the second call; Press CONF key or press the ConfCall softkey to join the new party in the established conference. Split and Re-conference. During the conference, press HOLD key.
server or pressing the Voicemail button (Voice Mail User ID has to be properly configured as the voice mail number under Web GUI->Account x->General Settings). An IVR will prompt the user through the process of message retrieval. SHARED CALL APPEARANCE (SCA) The GXP2120/GXP2110/GXP2100/GXP14xx phone supports shared call appearance by Broadsoft standard. This feature allows members of the SCA group to shared SIP lines and provides status monitoring (idle, active, progressing, hold) of the shared line.
Send Caller ID (for all subsequent calls) *31 • Off hook the phone; • Dial *31. Block Caller ID (per call) *67 • Off hook the phone; • Dial *67 and then enter the number to dial out. Send Caller ID (per call) *82 • Off hook the phone; • Dial *82 and then enter the number to dial out. Disable Call Waiting (per Call) *70 • Off hook the phone; • Dial *70 and then enter the number to dial out.
• Hang up the call. Delayed Call Forward. To set up delayed call forward: *92 • Off hook the phone; • Dial *92 and then enter the number to forward the call; • Press OK softkey or SEND key. Cancel Delayed Call Forward. To cancel the delayed call forward: *93 • Off hook the phone; • Dial *93; • Hang up the call. CUSTOMIZED LCD SCREEN & XML The GXP2120/GXP2110/GXP2100/GXP14xx IP phone supports the following XML applications.
CONFIGURATION GUIDE The GXP2120/GXP2110/GXP2100/GXP14xx can be configured via two ways: • LCD Configuration Menu using the phone's keypad; • Web GUI embedded on the phone using PC's web browser. CONFIGURATION VIA KEYPAD To configure the LCD menu using phone's keypad, follow the instructions below: • Enter MENU options. When the phone is in idle, press the round MENU button to enter the configuration menu; • Navigate in the menu options.
Phone Book Displays phonebook. Users could add, edit, search and delete contacts/groups here, or download phonebook XML to the phone. LDAP Directory Searches LDAP directory and configures LDAP options. Instant Messages Displays received instant messages. Direct IP Call Makes direct IP call. Preference Preference sub menu includes the following options: • Do Not Disturb Enables/disables Do Not Disturb on the phone.
Config Config sub menu includes the following options: • SIP Configures SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID, SIP Password, SIP Transport and Audio information to register SIP account on the phone. • Upgrade Configures firmware server and config server for upgrading and provisioning the phone. • Factory Reset Resets the phone to factory default settings. • Layer 2 QoS Configures 802.1Q/VLAN Tag and priority value.
MENU Call History Status Phone Book LDAP Directory Instant Messages Direct IP Call Preference Config Factory Functions Network Answered Calls Dialed Calls Missed Calls Transferred Calls Forwarded Calls Clear All Back First Name Last Name Number Acct Groups Confirm Add Cancel & Return Groups New Entry Search Download Phonebook XML Delete All Entries Back Server Address Port Base User Name Password LDAP Number Filter LDAP Name Filter LDAP Version ...
Note: *LCD Brightness is not applicable to GXP140x. CONFIGURATION VIA WEB BROWSER The GXP2120/GXP2110/GXP2100/GXP14xx embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow a user to configure the IP phone through a Web browser such as Microsoft’s IE, Mozilla Firefox and Google Chrome. To access the Web GUI: 1. Connect the computer to the same network as the phone; 2. Make sure the phone is turned on and shows its IP address.
DEFINITIONS This section describes the options in the phone's Web GUI. As mentioned, you can log in as an administrator or an end user.
Part Number Software Version Product part number. • Boot: boot version number; • Core: core version number; • Base: base version number; • Prog: program version number. This is the main firmware release number, which is always used for identifying the software system of the phone; • Aux: Aux version number; • Dsp: DSP version number. System Up Time System up time since the last reboot. System Time Current system time on the phone system. Service Status GUI and Phone service status.
Allows you to access voice messages by pressing the MESSAGE button on Voice Mail User ID the phone. This ID is usually the VM portal access number. For example, in Asterisk server, 8500 could be used. Account x -> Network Settings This parameter controls how the Search Appliance looks up IP addresses for hostnames. There are four modes: A Record, SRV, NATPTR/SRV, Use Configured IP. The default setting is "A Record".
maximum value is 64800 minutes (about 45 days). Reregister Before Specifies Expiration re-registration request before the Register Expiration. The default value is 0. the time frequency (in seconds) that the phone sends Defines the local SIP port used to listen and transmit. The default value is Local SIP Port 5060 for Account 1, 5062 for Account 2, 5064 for Account 3, 5066 for Account 4, 5068 for Account 5, 5070 for Account 6.
Controls whether the Privacy Header will present in the SIP INVITE message or not. The default setting is "default", which is when "Huawei IMS" special Use Privacy Header feature is on, the Privacy Header will not show in INVITE. If set to "Yes", the Privacy Header will always show in INVITE. If set to "No", the Privacy Header will not show in INVITE. Controls whether the P-Preferred-Identity Header will present in the SIP INVITE message or not.
PUBLISH for Presence Enables presence feature on the phone. The default setting is "No". Different soft switch vendors have special requirements. Therefore users may Special Feature need select special features to meet these requirements. Users can choose from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro or Huawei IMS depending on the server type. The default setting is "Standard".
from Proxy Only message will be checked. If it doesn't match the SIP server address of the account, the call will be rejected. The default setting is "No". Authenticate Incoming If set to "Yes", the phone will challenge the incoming INVITE for authentication INVITE with SIP 401 Unauthorized response. The default setting is "No". Account x -> Audio Settings Specifies the mechanism to transmit DTMF digits.
Jitter Buffer Length Selects Low, Medium, or High based on network conditions. The default setting is "Medium". Account x -> Call Settings Early Dial Dial Plan Prefix Selects whether or not to enable early dial. If it's set to "Yes", the SIP proxy must support 484 response. The default setting is "No". Sets the prefix added to each dialed number. A dial plan establishes the expected number and pattern of digits for a telephone number. This parameter configures the allowed dial plan for the phone.
• <=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by dialing 7 numbers and 1617 area code will be added automatically; • 1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11 digits length; • 011[2-9]x - allows international calls starting with 011; • [3469]11 - allows dialing special and emergency numbers 311, 411, 611 and 911.
Selects the distinctive ring tone for the matching rule. When the incoming caller ID or Alert Info matches the rule, the phone will ring with the selected ring. Ring Timeout Send Anonymous Anonymous Call Rejection Auto Answer Allow Auto Answer by Call-Info Defines the timeout (in seconds) for the rings on no answer. The default setting is 60 seconds. If set to "Yes", the "From" header in outgoing INVITE messages will be set to anonymous, essentially blocking the Caller ID to be displayed.
the local SIP and RTP ports. This is usually necessary when multiple phones are behind the same full cone NAT. The default setting is "Yes" (This parameter must be set to "No" for Direct IP Calling to work). Specifies how often the phone sends a blank UDP packet to the SIP Keep-alive Interval server in order to keep the "ping hole" on the NAT router to open. The default setting is 20 seconds. Use NAT IP The NAT IP address used in SIP/SDP messages. This field is blank at the default settings.
aaa.bbb.ccc comes from the local IP address REGARDLESS of subnet mask. #XX or #X are also valid so leading 0 is not required (but OK). No SIP server is required to make quick IP call. The default setting is "No". Disable Conference Disable in-call DTMF Display Enable MPK sending DTMF Disable DND Button Disables the Conference function. The default setting is "No". When it's set to "Yes", the DTMF digits entered during the call will not display. The default setting is "No".
When headset is connected to the phone, users could use the HEADSET button in "Default Mode" or "Toggle Headset/Speaker". • Default Mode: When the phone is in idle, press HEADSET button to off hook the phone and make calls by using headset. Headset icon will display on the screen in dialing/talking status. When there is an incoming call, press HEADSET button to pick up the call using headset. When there is an active call using headset, press HEADSET button to hang up the call.
Configures the LCD backlight brightness level (from 0 to 8) for phone's idle status. The default value is 2. Backlight Brightness: Idle Note: This options is not applicable to GXP140x. LCD Contrast Configures the LCD contrast level (from 0 to 20). The default value is 10. When it's set to "Yes", the LCD backlight will not be turned on when there is a new missed call. The default setting is "No". Disable Missed Call Backlight Note: This option is not applicable to GXP140x.
Time Display Format • yyyy-mm-dd: 2012-07-02 • mm-dd-yyyy: 07-02-2012 • dd-mm-yyyy: 02-07-2012 • dddd, MMMM dd: Friday, October 12 • MMMM dd, dddd: October 12, Friday Configures the time display in 12-hour or 24-hour format on the LCD. The default setting is in 12-hour format. Settings -> Web Service Configures to enable or disable weather update on the phone. The Enable Weather Update default setting is "Yes". If set to "No", the weather information screen will not show.
Note: This option is not applicable to GXP14xx. Settings -> XML Applications Configures to enable idle screen XML download. Users could select Idle Screen XML Download HTTP/HTTPS/TFTP to download the XML idle screen file. The default setting is "No". Download Screen XML At If set to "Yes", the idle screen XML file will be downloaded when the Bootup phone boots up. The default setting is "No". User Custom Filename Specifies the custom file for the idle screen XML file to be downloaded.
Select the Account to monitor the BLF status. Enter the extension number in the Value field to be monitored. • Presence Watcher This option has to be supported by a presence server and it is tied to the "Do Not Disturb" status of the phone's extension. • Eventlist BLF This option is similar to the BLF option but in this case the PBX collects the information from the phones and sends it out in one single notify message. PBX server has to support this feature.
Assigns a function to the corresponding Multi Purpose Key. The key mode options are: • Speed Dial Select the Account to dial from. And enter the Speed Dial number in the Value field to be dialed. • BLF (Busy Lamp Field) This option has to be supported on the PBX and it indicates the status of the extension. The three possible states are idle (green), busy (red), ringing (blinking red).
• LDAP Search This option is to narrow the LDAP search scope. Enter the LDAP search base in the Name field. It could be the same or different from the Base in LDAP configuration under Advanced Settings. The Base in LDAP configuration will be used if the Name field is left blank. Enter the LDAP Name/Number filter in the Value field. NETWORK PAGE DEFINITIONS Network -> Basic Settings Internet Protocol Selects Prefer IPv4 or Prefer IPv6.
DNS Server 1 Enter the DNS Server 1 for IPv6. DNS Server 2 Enter the DNS Server 2 for IPv6. Preferred DNS server Enter the Preferred DNS Server for IPv6. Network -> Advanced Settings Allows the user to enable/disable 802.1X mode on the phone. The default 802.1X mode value is disabled. To enable 802.1X mode, this field should be set to EAP-MD5. 802.1X Identity Enter the Identity for the 802.1X mode. MD5 Password Enter the MD5 Password for the 802.1X mode. 802.1X CA Certificate 802.
of 30 characters. Confirm Password Confirms the admin password field to be the same as above. Maintenance -> Upgrade and Provisioning Firmware Upgrade and Provisioning Specifies how firmware upgrading and provisioning request to be sent: Always Check for New Firmware, Check New Firmware only when F/W pre/suffix changes, Always Skip the Firmware Check. XML Config File The password for encrypting the XML configuration file using OpenSSL.
Day of the Week (0-6) Authenticate Conf File Defines the day of the week to check HTTP/TFTP server for firmware upgrades or configuration files changes. The default value is 1. Authenticates configuration file before acceptance. The default setting is "No". Maintenance -> Syslog Syslog Server The URL or IP address of the syslog server for the phone to send syslog to. Selects the level of logging for syslog. The default setting is "None". There are 4 levels: DEBUG, INFO, WARNING AND ERROR.
Password Connection Request Port The port for the ACS to connect to the phone. CPE SSL Certificate The Cert File for the phone to connect to the ACS via SSL. CPE SSL Private Key The Cert Key for the phone to connect to the ACS via SSL. Maintenance -> Security Configures the access control for the users to configure from keypad Menu. There are three different options: Configuration via Keypad Menu • Unrestricted. All the options can be accessed in keypad Menu. • Basic settings only.
Interval automatic download will be disabled. The default value is 0. The valid range is 5 to 720 minutes. Remove Manually-edited If set to "Yes", when XML phonebook is downloaded, the entries added Entries on Download manually will be automatically removed. The default setting is "Yes". Download XML Phonebook Upload XML Phonebook Click on "Download" to download the XML phonebook file to local PC. Click on "Upload" to upload local XML phonebook file to the phone.
default setting is "Version 3". Specify the "name" attributes of each record which are returned in the LDAP search result. This field allows the users to configure multiple space separated LDAP Name Attributes name attributes. Example: gn cn sn description Specifies the "number" attributes of each record which are returned in the LDAP search result. This field allows the users to configure multiple space LDAP Number Attributes separated number attributes.
• STUN Server Enter a STUN Server IP (or FQDN) that you may have, or look up a free public STUN Server on the internet and enter it on this field. If using Public IP, keep this field blank. • Use Random Ports This setting depends on your network settings. When set to "Yes", it will force random generation of both the local SIP and RTP ports. This is usually necessary when multiple GXPs are behind the same NAT. If using a Public IP address, set this parameter to "No".
• Enter the city name in the search field. For example, Boston, MA. And click on "SEARCH"; • The searching result will show in a new window with URL in the browser's address bar. For example, http://www.weather.com/weather/right-now/Boston+MA+USMA0046 • In the above link, USMA0046 is the city code to be filled in "Self-Defined City Code" option. Users could then further configure the "Update Interval" and "Degree Unit" for weather information display.
account. Please see Figure 4 and Figure 5 in the following pages for more details. Additionally, users could directly send the command for the phone to dial out by specifying the following URL in PC's web browser, or in the field as required in other call modules. http://ip_address/cgi-bin/api-make_call?phonenumber=1234&account=0&password=admin In the above link, replace the fields with • ip_address: Phone's IP Address.
Figure 5: Click-to-Dial SAVING THE CONFIGURATION CHANGES After users makes changes to the configuration, press the "Save" button will save but not apply the changes until the "Apply" button on the top of web GUI page is clicked. Or, users could directly press "Save and Apply" button. We recommend rebooting or powering cycle the phone after applying all the changes. REBOOTING FROM REMOTE LOCATIONS Press the "Reboot" button on the top right corner of the web GUI page to reboot the phone remotely.
UPGRADING AND PROVISIONING The GXP2120/GXP2110/GXP2100/GXP14xx can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP or HTTP/HTTPS; the server name can be FQDN or IP address. Examples of valid URLs: firmware.grandstream.com fw.ipvideotalk.com/gs There are two ways to setup a software upgrade server: The LCD Keypad Menu or the Web Configuration Interface.
restart again. Please do not interrupt or power cycle the phone when the upgrading process is on. Firmware upgrading takes around 60 seconds in a controlled LAN or 5-10 minutes over the Internet. We recommend completing firmware upgrades in a controlled LAN environment whenever possible. NO LOCAL TFTP/HTTP SERVERS For users that would like to use remote upgrading without a local TFTP/HTTP server, Grandstream offers a NAT-friendly HTTP server.
numbers. i.e., P2 is associated with the "Admin Password" in the Web GUI->Maintenance->Web/Telnet Access page. For a detailed parameter list, please refer to the corresponding firmware release configuration template. When the GXP2120/GXP2110/GXP2100/GXP14xx boots up or reboots, it will issue a request to download a configuration XML file named "cfgxxxxxxxxxxxx.xml" followed by a file named "cfgxxxxxxxxxxxx", where "xxxxxxxxxxxx" is the MAC address of the phone, i.e., "cfg000b820102ab.
RESTORE FACTORY DEFAULT SETTINGS Warning: Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup or print all the settings before you restore to the factory default settings. Grandstream is not responsible for restoring lost parameters and cannot connect your device to your VoIP service provider.
EXPERIENCING THE GXP2120/GXP2110/GXP2100/GXP14xx Please visit our website: http://www.grandstream.com to receive the most up- to-date updates on firmware releases, additional features, FAQs, documentation and news on new products. We encourage you to browse our product related documentation, FAQs and User and Developer Forum for answers to your general questions. If you have purchased our products through a Grandstream Certified Partner or Reseller, please contact them directly for immediate support.
