User Manual

P a g e | 37
GXP21XX User Guide
Message. Press to view voicemail messages.
Transfer. Press to transfer call.
Conference. Press to conference call.
Speaker.
Send/Redial.
Volume.
Up Navigation key. In idle screen, press to see the IP.
Making Phone Calls
Handset, Speaker and Headset Mode
The GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 allows users to switch among handset, speaker or
headset when making calls. Press the Hook Switch to switch to handset; press the Headset button to switch
to headset; or press the Speaker button to switch to speaker.
Multiple SIP Accounts and Lines
GXP2160/GXP2170 can support up to 6 independent SIP accounts; GXP2140 can support up to 4
independent SIP accounts; GXP2130 can support up to 3 independent SIP accounts. Each account is
capable of independent SIP server, user and NAT settings. Each of the line buttons is "virtually" mapped to
an individual SIP account. In off hook state, select an idle line and the dial tone will be heard.
To make a call, select the line you wish to use. The corresponding LINE LED will light up in green. The user
can switch lines before dialing any number by pressing the LINE buttons.
For example: If 2 independent accounts are registered on GXP2130 / GXP2140 / GXP2160 /
GXP2170/GXP2135, when LINE 1 is pressed, the LINE 1 LED will light up in green. If LINE 2 is pressed,
the LINE 2 LED will light up in green and the subsequent call will be made through SIP account 2.
Incoming calls to a specific account will attempt to use its corresponding LINE if it is not in use. When the
"virtually" mapped line is in use, the phone will flash the other available LINE in red. A line is ACTIVE when
it is in use and the corresponding LED is red.
Completing Calls
There are several ways to complete a call.
• On hook dialing. Enter the number when the phone is on hook and then send out.
➢ When the phone is in idle, enter the number to be dialed out;
➢ Take handset off hook; or