User Manual

P a g e | 65
GXP21XX User Guide
Figure 46: Account Mode
For example, with line mode, when the line is in use, by pressing the VPK, nothing is going to happen. In
Account Mode, when the line is in use, by pressing the VPK, a new line will be initiated.
4-Way/ 5-Way Conferencing
GXP2130 can host up to 4-way conference call with other parties (PCMU/PCMA). GXP2140/GXP2160
/GXP2170/GXP2135 can host up to 5-way conference call.
• Initiate a conference call.
➢ Establish calls with 2 or more parties respectively;
➢ While 1 call is active, the other call will be put on hold with its LINE key blinking in green;
➢ Press CONF key;
➢ Press the desired LINE key on hold, the conference will be established;
➢ Repeat the previous 2 steps for all the other parties on hold to join the conference.
• Cancel Conference.
➢ If after pressing the CONF key, the user decides not to conference, press Cancel softkey or the
current active LINE key (LED in solid green);
➢ This will resume the 2-way conversation with the current line.
• Split and Re-conference.
➢ During the conference, press HOLD key. The conference call will be split and the calls will be put
on hold separately with the LINE keys blinking in green;
➢ Select 1 LINE key and press to resume the 2-way conversation;
➢ If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is held/split;
• End Conference.
➢ Press HOLD key to split the conference call. The conference call will be ended with both calls on
hold; Or
➢ Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 supports Easy Conference Mode, which can be used
combined with the traditional way to establish the conference.