Operation Manual

GXV3601 IP Camera
Firmware 1.0.4.6 Page 26 of 36
Grandstream Networks, Inc. 09/2010
SSL – Checked if the SMTP server requires a secure connection.
Test Email Account Settings – Click the Test button to send a test email from the From
E-Mail to the To E-Mail to make sure that SMTP is configured properly. If the receiver can get
the test email, then the SMTP settings are ready to go.
GXV3601 FTP Page
The FTP server is used to store video files if you configure the GXV3601 to record video and
upload it to the FTP server when an alarm event or motion detection is triggered.
FTP Settings
Enable FTP – The default setting is “No,” if you want the GXV3601 to upload the recorded
video to the FTP server when an alarm is triggered, set this field to “Yes.”
FTP Server – The IP address or hostname
of the SMTP server, ie. ftp.myserver.com.
FTP Server Port – The port that your FTP
server is using.
User Name / Password – The user name
and password required to log into your
FTP server
Path – The directory in the FTP server
where recorded video will be uploaded.
Test FTP Account Settings – Click the
Test button to upload a sample file to make
sure that FTP is properly configured.
GXV3601 PTZ Page
This page configures the PTZ settings. Select the PTZ protocol that your connected
equipment supports by clicking on the radio in front of the protocol. Next, select the
Baudrate from the drop down menu.
PTZ Configuration Items
PTZ Protocol – The GXV3601
supports both Pelco-D and Pelco-P.
Select the protocol your PTZ
equipment supports.
PTZ Baudrate – The Baud rate is the
number of distinct symbol changes (signaling events) made to the transmission medium