Quick Installation Guide

ManualsBrandsGRANDSTREAM ManualsComputers & AccessoriesAnalog IP Gateway

Grandstream Networks, Inc.

126 Brookline Ave, 3rd Floor

Boston, MA 02215. USA

Tel : +1 (617) 566 - 9300

Fax: +1 (617) 249 - 1987

www.grandstream.com

For Certication, Warranty and RMA information, please visit

www.grandstream.com

GXW42XX V2

High-Density, Gigabit Gateways

Quick Installation Guide

Summary of content (5 pages)

PAGE 1
Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 - 9300 Fax: +1 (617) 249 - 1987 www.grandstream.com GXW42XX V2 High-Density, Gigabit Gateways For Certification, Warranty and RMA information, please visit www.grandstream.
PAGE 2
EN The GXW42XX V2 Series is not pre-configured to support or carry emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is Your responsibility to purchase SIP-compliant Internet telephone service, properly configure the GXW42XX V2 series to use that service, and periodically test your configuration to confirm that it works as You expect.
PAGE 3
OVERVIEW CONNECTING THE GATEWAY The GXW42XX V2 high-density FXS gateway series enables 1. Connect a standard touch-tone anlaog telephone (or fax machine) to the FXS analog port on the front panel (GXW4248 V2 has no FXS port, and it need to use the telco cable to connect the RJ21 port on its back panel, see section “Telecom Port Instalation “ for details).
PAGE 4
You will need the following information to configure the GXW42XX V2 series via the web browser: Below is a picture of RJ11 female port patch panel. • IP address, subnet mask and gateway IP if using static IP. • Each SIP server and/or Outbound Proxy FQDN or IP address for one Profile (4 in total). • User subscriber information: User ID, Authentication ID, Password under FXS port label. • Please contact your ITSP for additional settings that may be necessary to configure the device.
PAGE 5
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.