Quick Installation Guide
~3~ ~4~
OVERVIEW
GXW42XX V2 CONFIGURATION
Congure using Interactive Voice Prompt
Congure using embedded Web server
CONNECTING THE GXW42XX V2
SERIES
CONNECTING THE GATEWAY
The GXW42XX V2 high-density FXS gateway series enables
businesses of all sizes to create a cost-eective hybrid IP
and analog telephone system that oers the benets of VoIP
communications and takes advantage of Gigabit speeds
while preserving investment on existing analog phones, fax
machines and legacy PBX systems. The GXW42XX V2 se-
ries includes 16/24/32/48 FXS ports, a Gigabit network port
and features broad interoperability with most service provid-
ers, soft-switches and SIP-based environments.
Refer to the illustration below when following the instructions on
the next page.
Here is the example for GXW4232 V2.
FXS ports
LCD screen
LCD Light
LAN port Analog port
1. Connect a standard touch-tone anlaog telephone (or
fax machine) to the FXS analog port on the front panel
(GXW4248 V2 has no FXS port, and it need to use the
telco cable to connect the RJ21 port on its back panel,
see section “Telecom Port Instalation “ for details).
2. Insert the Ethernet cable into the LAN port of GXW42XX
V2 and connect the other end of the Ethernet cable to an
uplink port (a router, a modem, etc.).
3. Using the embedded web server or IVR (Interactive
Voice Prompt) menu, you can further congure the gate-
way using either a static IP or DHCP.
From the analog phone, press *** to get into the IVR
menu. Follow the voice instruction, and congure the
setting.
1. From the analog phone, press *** to get into the IVR
menu. Enter option 002 to obtain the Gateway’s IP ad-
dress.
2. Type the device’s IP address in your PC browser.
3. Log in using the password printed in the label to cong-
ure the gateway.