Operation Manual

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 31 OF 54
• MAINTENANCE: Basic settings such as basic network, date and time settings, and web/telnet
access settings can be set here.
• PROFILE - AUDIO SETTINGS: DTMF, Vocoder, and Analog Line settings can be configured here
for each port.
Additional functions available to administrators are:
• MAINTENANCE: Full settings for network, upgrade/provisioning, TR-069, Security and Syslog.
• ADVANCED SETTINGS: To set advanced Ring Tongs, FXO Failover, and System Features.
• PROFILE X: To configure General Settings, Network Settings, SIP Settings, Fax Settings, Audio
Settings, Call Settings, Ring Tones
• FXS PORTS: To configure each of the FXS ports and Hunting Groups etc.
TABLE 7: MAINTENANCE: NETWORK SETTINGS
IP Address Mode
Chose to configure with DHCP, Static IP or PPPoE
Preferred DNS
Server
Enter the preferred DNS server that should be used for DHCP and PPPoE.
DHCP Settings
Host name (Option 12)
Specifies the name of the client. This field is optional but may be
required by Internet Service Providers.
DHCP Domain
Specifies the DHCP Domain. This value is optional, but may be
required by Internet Service Providers.
Vendor Class ID
(Option 60)
Used by clients and servers to exchange vendor class ID.
Static IP Settings
Configure the IP address, Subnet Mask, Default Router IP address, DNS Server 1 (primary),
DNS Server 2 (secondary) fields. These fields are set to zero by default.
QoS Settings
Configure the Layer 3 QoS, Layer 2 QoS 802.1Q/VLAN Tag, and Layer 2 QoS 802.1p Priority
Value.
STUN Settings
Configure the STUN server parameters, including: Use STUN (Yes/No), STUN server (IP or
Domain), Number of STUN Response Misses Allowed, and Keep-Alive Interval.