Operation Manual

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 33 OF 54
TABLE 8: STATUS PAGE
MAC Address
The device ID in hexadecimal format. This is needed for Internet Service Provider
troubleshooting. The MAC address will be used for provisioning and can be found on the label
on original box and on the label located on the bottom panel of the device.
WAN IP
Address
Shows WAN IP address of GXW42XX
Product Model
Contains the product model info.
Software
Version
Program: This is the main software release. Boot and Loader are not changed often.
System Up
Time
Shows system uptime since the last reboot.
PPPoE Link Up
Shows whether the PPPoE connection is running if connected to DSL modem.
NAT
Shows type of NAT the GXW42XX is connected to via its WAN port. It is based on STUN
protocol.
Port Status
Displays relevant information regarding the individual FXS ports. Example:
Port
Hook
Registration
DND
Forward
Busy
Forward
Delayed
Forward
FXS1
On Hook
Registered
No
613
FXS2
Off Hook
Registered
No
614
FXS3
On Hook
Not Registered
No
FXS4
On Hook
Registered
Yes
615
FXS…
…
…
…
Advanced User configuration includes not only the end user configuration, but also advanced
configurations such as: SIP configuration, Codec selection, NAT Traversal Setting and other
miscellaneous configuration.
TABLE 9: ADVANCED SETTINGS
Admin Password
Administrator password. Only the administrator can configure the “Advanced Settings” page.
Password field is purposely left blank for security reasons after clicking update and saved. The
maximum password length is 25 characters.