Operation Manual

FIRMWARE 1.0.0.49 GXW42XX USER MANUAL PAGE 35 OF 54
XML Config File
Password
The password used for encrypting the XML configuration file using OpenSSL.
This is required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS
User Name
The user name needed to authenticate withthe HTTP/HTTPS server.
HTTP/HTTPS
Password
The password needed to authenticate with the HTTP/HTTPS server.
Firmware File
Prefix
Default is blank. If configured, GXW42XX will request firmware file with the prefix. This setting
is useful for Internet Telephone Service Providers. End users should keep it blank.
Firmware File
Postfix
Default is blank. This setting is useful for Internet Telephone Service Providers. End users
should keep it blank.
Config File Prefix
Default is blank. This setting is useful for Internet Telephone Service Providers. End users
should keep it blank.
Config File
Postfix
Default is blank. This setting is useful for Internet Telephone Service Providers. End users
should keep it blank.
Allow DHCP
Option 66 to
override server
If set to “Yes”, configuration and upgrade server’s information can be obtained using DHCP
option 66 from DHCP server. This option specifies the URL of the tftp server.
Note: If DHCP Option 66 is enabled, the gateway will attempt downloading a configur
ation file
from the server URL provided by DHCP, even though Config Server Path is left blank.
Automatic
Upgrade
Choose “Yes” to enable automatic upgrade and provisioning. When set to No, GXW42XX will
only do upgrade once at boot up.
When “Check every day” or “Check every week” is checked, user can specify
“Hour of the day
(0-23)” or “Day of the week (0-6)”. Default time is Monday 1AM.
There are three options to choose from: “Always check for New Firmware at Boot up”, “
Check
New Firmware only when F/W pre/suffix changes”, and “Always Skip the Firmware Check”.
Authenticate
Conf File
If set to Yes, configuration file is authenticated before being accepted. This protects the
configuration from unauthorized modifications.
Firmware Key
For firmware encryption. It should be 32-digit in Hexadecimal Representation. End user
should keep it blank.
SSL Certificate
The GXW42XX series supports SIP over TLS. It has built-in private key and SSL
certificate. The user specified SSL certificate used for SIP over TLS is in X.509 format.
SSL Private Key
You may also customize the SSL Private Key. The user specified SSL private key used for SIP
over TLS is in X.509 format.