User's Manual
Table Of Contents
- CHANGE LOG
- WELCOME
- GATEWAY GXW450X OVERVIEW
- GETTING STARTED
- SYSTEM STATUS
- SYSTEM SETTINGS
- TRUNKS
- PBX SETTINGS
- MAINTENANCE
- CDR (Call DETAIL RECORD)
- EXPERIENCING THE GXW450X SERIES DIGITAL GATEWAY
Page | 108
GXW450X User Manual
Version 1.0.0.6
The default syslog level for all modules is "error", which is recommended in your GXW450X settings
because it can be helpful to locate the issues when errors happen.
Some typical modules for GXW450X functions are as follows and users can turn on "notice" and "verb"
levels besides "error" level.
• pbx: This module is related to general PBX functions.
• pjsip: This module is related to SIP calls.
• chan_dahdi: This module is related to digital calls (E1/T1/J1).
Figure 59: Syslog Settings
Note:
Syslog is usually for debugging and troubleshooting purpose. Turning on all levels for all syslog modules
is not recommended for daily usage. Too many syslog prints might cause traffic and affect system
performance.
The reserved size for Syslog entries on the cache memory of the GXW is 50M, once this sized is reached
the GXW will clean up 2M of the oldest Syslog entries to allow to save new logs.