User's Manual
Table Of Contents
- CHANGE LOG
- WELCOME
- GATEWAY GXW450X OVERVIEW
- GETTING STARTED
- SYSTEM STATUS
- SYSTEM SETTINGS
- TRUNKS
- PBX SETTINGS
- MAINTENANCE
- CDR (Call DETAIL RECORD)
- EXPERIENCING THE GXW450X SERIES DIGITAL GATEWAY
Page | 114
GXW450X User Manual
Version 1.0.0.6
Figure 67: Network Upgrade
Table 41: Network Upgrade Configuration
Upgrade Via
Allow users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Firmware Server Path
Configures firmware server path.
For example, firmware.grandstream.com
Firmware File Prefix
If configured, only the firmware with the matching encrypted prefix will be
downloaded.
Firmware File Suffix
If configured, only the firmware with the matching encrypted postfix will be
downloaded.
HTTP/HTTPS User Name
The user name for the HTTP/HTTPS server.
HTTP/HTTPS Password
The password for the HTTP/HTTPS server.
Please follow the steps below to upgrade the firmware remotely.
1.
2.
Enter the firmware server path under Web GUIMaintenanceUpgrade.
3.
Click on "Save". Then reboot the device to start the upgrading process.
4.
Please be patient during the upgrading process. Once done, a reboot message will be displayed
in the LCD.
Manually reboot the GXW450X when it's appropriate to avoid immediate service interruption.
After it boots up, log in the Web GUI to check the firmware version.