User's Manual
Table Of Contents
- CHANGE LOG
- WELCOME
- GATEWAY GXW450X OVERVIEW
- GETTING STARTED
- SYSTEM STATUS
- SYSTEM SETTINGS
- TRUNKS
- PBX SETTINGS
- MAINTENANCE
- CDR (Call DETAIL RECORD)
- EXPERIENCING THE GXW450X SERIES DIGITAL GATEWAY
Page | 125
GXW450X User Manual
Version 1.0.0.6
Ethernet Capture
An ethernet trace can be captured for troubleshooting purposes related to network issues, the SIP flow
etc.
The captured trace can be downloaded for analysis. Instructions or result will be displayed in the Web
GUI output result.
Figure 77: Ethernet Capture
Table 44: Ethernet Capture Parameters
Interface Type
Select the network interface to monitor.
Enable SFTP Data Sync
Check this box to save the capture files in the SFTP server.
Please make sure the configuration
of data synchronization
works in advance.
Storage to External Device
Check this box to activate storage of the capture either on the
USB or SD Card.
Capture Filter
Enter the filter to obtain the specific types of traffic, such as (host,
src, dst, net, proto…).
Start
Click to start the trace.
Stop
Click to stop the trace.
Download
Click to download the trace if trace is stored locally.
The output result is in .pcap format. Therefore, users could specify the capture filter as used in general
network traffic capture tool (host, src, dst, net, protocol, port, port range) before starting capturing the
trace.