User's Manual
Table Of Contents
- CHANGE LOG
- WELCOME
- GATEWAY GXW450X OVERVIEW
- GETTING STARTED
- SYSTEM STATUS
- SYSTEM SETTINGS
- TRUNKS
- PBX SETTINGS
- MAINTENANCE
- CDR (Call DETAIL RECORD)
- EXPERIENCING THE GXW450X SERIES DIGITAL GATEWAY
Page | 127
GXW450X User Manual
Version 1.0.0.6
Figure 79: Traceroute
Service Check
Enable Service Check to periodically check the GXW450X responsiveness. Check Cycle is configurable
in seconds and the default setting is 60 sec. Check Times is the maximum number of failed checks before
restart the GXW450X. The default setting is 3. If there is no response from GXW450X after 3 attempts
(default) to check, current status will be stored and GXW450X will be restarted.
Figure 80: Service Check