User's Manual

Page | 19
GXW450X User Manual
Version 1.0.0.6
GETTING STARTED
This chapter provides basic installation instructions including the list of the packaging contents and also
information for obtaining the best performance with the GXW450X.
Equipment Packaging
Unpack and check all accessories. Equipment
includes
• One device unit (GXW4501, GXW4502 or
GXW4504)
• One RJ45 Ethernet cable
• One 12V universal power adapter
• One Quick Installation
• One GPL Statement
Connecting the GXW450X
Connecting the GXW450X gateway is easy. Follow these steps to connect your GXW450X gateway to the
Internet and access the unit’s configuration pages.
1. Connect one end of a straight through RJ45 Ethernet cable into the WAN port of the GXW450X;
connect the other end into the uplink port of an Ethernet switch/hub.
2. Connect the 12V DC power adapter into the DC 12V power jack on the back of the GXW450X.
Insert the main plug of the power adapter into a surge-protected power outlet.
3. Connect one end of the T1/E1/J1 cable provided from the service provider into the T1/E1/J1 port
of the GXW450X; connect the other end into the T1/E1/J1 wall jack.
4. Wait for the GXW450X to boot up. The front LCD display will show the GXW450X hardware
information when the boot process is completed.
5. Once the GXW450X is successfully connected to the network via WAN port, the Network LED
indicator will be lit green, and an IP address will be shown on the LCD display.
Figure 1: GXW450X Package Contents