User's Manual

Table Of Contents

Page | 21

GXW450X User Manual

Version 1.0.0.6

Table 4: LCD Menu Options

View Events

• Critical Events

• Other Events

Device Info

• Hardware: Hardware version number

• Software: Software version number

• P/N: Part number

• MAC: Device MAC address

• Uptime: System up time since the last reboot

Network Info

• LAN Mode: DHCP, Static IP or PPPoE

• LAN IP: IP address

• LAN Subnet Mask

Network Menu

• LAN Mode: Select LAN mode as DHCP, Static IP or PPPoE

• Static Routes Reset: Click to reset the static route setting

Factory Menu

• Reboot

• Factory Reset

• LCD Test Patterns

Press “OK” to start. Then press “Down” button to test different LCD

patterns. When done, press “OK” button to exit.

• Fan Mode

Select “Auto” or “On”.

• LED Test Patterns

Select “All On” “All Off” or “Blinking” and check LED status for USB, SD,

T1/E1/J1, Phone

1/Phone 2, Line 1/Line 2 ports. After the LED test, select

“Back” in the menu and the device will show the LED actual status again.

• RTC Test Patterns

Select “2022-02-22 22:22” or “2011-01-11 11:11” to start the RTC (Real-

Time Clock) test pattern. Check th

e system time from LCD idle screen by

pressing “DOWN” button, or from Web GUISystem StatusGeneral