User's Manual

Page | 36
GXW450X User Manual
Version 1.0.0.6
SYSTEM SETTINGS
This chapter explains configurations for system-wide parameters on the GXW450X. System settings are
under “System Settings” tab on GXW450X Web GUI. System settings include, Network Settings, Security
Settings, HTTP Server, Email Settings, Time Settings, OpenVPN® settings and DDNS Settings
HTTP Server
The GXW450X embedded web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML
pages allow the users to configure the gateway through a Web browser such as Microsoft IE, Mozilla
Firefox and Google Chrome. By default, the Gateway can be accessed via HTTPS using Port 8089 (e.g.,
https://192.168.1.50:8089). Users could also change the access protocol and port as preferred under
Web GUISystem SettingsHTTP Server.
Basic Settings
Redirect From Port 80
Enable or disable redirect from port 80. On the gateway
, the default
access protocol is HTTPS and the default port number is 8089. When
this option is enabled, the access using HTTP w
ith Port 80 will be
redirected to HTTPS with Port 8089. The default setting is "Enable".
Protocol Type
Select HTTP or HTTPS. The default setting is "HTTPS". This is also the
protocol used for zero config when the end point device downloads the
config file from the GXW450X.
Port
Specify port number to access the HTTP server. Default port is 8089.
Enable IP whitelist
If enabled, only the IP address on the permitted IP list will be allowed to
access the GXW450X’s web GUI.
Permitted IP(s)
Add an IP address to the list of allowed IPs to access GXW450X’s web
GUI. Ex: 192.168.6.233 / 255.255.255.255
Certificate Settings
Options
Select the mode to download SSL certificates for web server, two modes
are available:
• Manually Upload certificate:
Upload the files while respecting
size and format.