User's Manual

Page | 37
GXW450X User Manual
Version 1.0.0.6
• Automatically request certificate: enter domain from which to
request the certificate files.
TLS Private Key
Upload private key for the built-in http server.
Note:
The size of the key file must be under 2MB and the it will be
renamed as "private.pem" automatically.
TLS Cert
Upload certificate for the built-
in http server and override the existing
one.
Note:
The size of your certificate must be under 2MB. This is the
certificate file (*.pem format only) for TLS connection and it will be
renamed as "certificate.pem" automatically. It contains private key for the
client and signed certificate for the server.
Reset Certificate
R
estore the default key and certificate. The web server needs to reload
to take effect after certificate restoration.
Network Settings
After successfully connecting the GXW450X to the network for the first time, users could login the Web
GUI and go to System Settings
Network Settings to configure the network parameters for the device.
In this section, all the available network setting options are listed. Select each tab in Web GUI
System
Settings
Network Settings page to configure IPV4 Settings, IPV6 Settings, 802.1X and Static Routes.
Basic Settings
Please refer to the following tables for basic network configuration parameters on GXW450X.
Table 7: GXW450X Network SettingsBasic Settings
Method
Switch:
WAN port interface will be used for uplink connection. LAN port
interface will be used as a room for PC connection.
MTU
Specifies the Maximum Transmission Unit. (By default, its 1500)
IPv4 Address
Preferred DNS Server
Enter the preferred DNS server address. If
Preferred DNS is used,