User's Manual
Table Of Contents
- CHANGE LOG
- WELCOME
- GATEWAY GXW450X OVERVIEW
- GETTING STARTED
- SYSTEM STATUS
- SYSTEM SETTINGS
- TRUNKS
- PBX SETTINGS
- MAINTENANCE
- CDR (Call DETAIL RECORD)
- EXPERIENCING THE GXW450X SERIES DIGITAL GATEWAY
Page | 39
GXW450X User Manual
Version 1.0.0.6
DNS Server 2
Enter the DNS server 2 address for static settings.
802.1X Settings
IEEE 802.1X is an IEEE standard for port-based network access control. It provides an authentication
mechanism to device before the device can access Internet or other LAN resources. The GXW450X
supports 802.1X as a supplicant/client to be authenticated. The following diagram and figure show the
GXW450X uses 802.1X mode “EAP-MD5” on WAN port as client in the network to access Internet.
Figure 19: GXW450X Using 802.1X as Client
Figure 20: GXW450X using 802.1X EAP-MD5
The following table shows the configuration parameters for 802.1X on GXW450X. Identity and MD5
password are required for authentication, which should be provided by the network administrator obtained